Here are the 8 best DIY methods to mount a soundbar on the ceiling. It is one of the better options to mount the sound system in the room. There are multiple benefits to choosing this place for it.
Can You Mount a Soundbar on the Ceiling? Yes, you can mount a soundbar on the ceiling by measuring the room’s size, finding a proper place, adjusting cables and power supply, using supporting devices to secure the soundbar, and fixing it with nuts and bolts.
You should use proper supporting materials there for the adequate mounting of devices on the ceiling.
You should keep the face of cones downwards to the sitting area of the home theater. You have to note all the things about the electrical appliances while making their connection. You have to choose the brackets of sound systems and their wires wisely.
You can study different parts of the sound system and their working. It will allow you to get knowledge of the sensitive parts.
- 1 Can You Mount a Soundbar on the Ceiling?
- 1.1 Measure the size of the room
- 1.2 Find a proper place for mounting
- 1.3 Choose appropriate cables
- 1.4 Choose a power supply for its connection
- 1.5 Use steel brackets to mount a soundbar on the ceiling
- 1.6 Fix nuts and bolts on ceiling
- 1.7 Make a test run
- 1.8 Why would you mount a soundbar on the ceiling?
Can You Mount a Soundbar on the Ceiling?
You have to look for the shape of the system you want to attach to the room ceiling. It is simple to note that the product you are purchasing will be made for a specific place.
It will require the downward direction of cones, while other sites will require different directions.
The weight should be less so that it can easily attach to the ceiling. You have to make sure that the system can connect to that place without any problem.
Measure the size of the room
Get an idea of the size of the room to install different types of appliances there. The size of the room is a significant factor that will decide the place of it. You should choose the backward place for it to throw the audio signals in all directions.
You will not face the problem of bass and volume while choosing the right place. The sound waves should travel in all directions while keeping it at that place.
You can use measuring tape or scale for the measurement of the room. You have to spare half an hour to measure the different sides of the room.
The height of the home theater room is essential for the installation of the sound equipment there. You can estimate your budget by looking at the average cost of soundbars.
Find a proper place for mounting
After doing all these things, you have to mark the right place for it. You should center from the room’s width so that it can cover all sides of the room.
Check the room’s length; you can choose the backside of the room so that it can cover all seats present in your entertainment setup.
After checking the sound quality at different places, you will get an idea of where it should be placed. You can change its location after some time when you see that it is not working well at a particular place.
You should not use it permanently before making its test run. It will allow you to check all the problems of the placement and its sound. You should know the average weight of the soundbar for this procedure.
Choose appropriate cables
There are different types of cables that you can use to transmit signals from one end to another. HDMI is the most used cable for the transmission of signals. It is an expensive cable that you cannot use in low budget home theaters.
Look for the best possible path for the signal in which no signal gets dropped. You should check various cables before deciding on one cable.
The other options for cables are optical cable and coaxial cable. Both cables are cheaper than HDMI cable, but the quality of the cable may compromise. You can use these cables for shorter distances and fewer intensity signals.
If you use them for longer distances, then there are chances that the quality of signals will decrease and you may notice that there is no sound coming from the soundbar.
You should use the cable that suits your budget and system both. You should make a continuous check on the quality of the wires that are present in your room.
Sometimes, the cables deteriorate because of the speaking and short-circuiting, which will damage the gadgets later on. The electrical products need your excellent care and attention.
Choose a power supply for its connection
You should use that supply by fulfilling the requirements of electrical circuits present there. You have to check that the system you are using should get an appropriate amount of voltages and current to the gadgets.
Power supply will consider as a better one if it fulfills the requirements of gadgets attached to it. The fluctuated voltage will lead to creating a bad impact on the device that you cannot neglect.
You have to check that the system should be better positioned to work at its full efficiency. The current and voltage rating of the supply will be written on it. You can check them while making their purchase. You can also connect two soundbars with one TV.
Use steel brackets to mount a soundbar on the ceiling
There are different types of supporting tools that we can use while fixing it. You can mark the exact position with the different types of pointers that will help you fix it on the walls. You should make all these things after complete research and understanding of matter.
The plastic and steel brackets are used for fixation at walls and at the ceiling. You can try brackets to make it secure.
Fix nuts and bolts on ceiling
After purchasing a particular type of bracket for your sound system, you have to use nuts and bolts to attach it to the concrete surface. It is easy to do by using the drill machine to make the holes to fix the screws and nuts there.
You can use a pointer to mark the nuts and bolts’ points that will help when you are drilling with a machine. It will allow you to make holes in the exact position.
You can adjust two to three nuts on one side of the gadget to fix it properly. You should get an idea of the fixation while using them once. You should use bolts that are at least two to three inches deep for a better connection.
Make a test run
You have to make a test run of the tool after doing all these steps. This should be time-barred in which you can get a proper idea of working all parts of the machines. You will get an idea of all components within five to ten minutes.
After doing that, you should refer to a possible solution to it. You can replace any part or repair it to get rid of this problem.
After making a test run of the system, you have to make any changes if required. You should keep an eye on working in all parts when you use them. You can use your devices for a longer time if you take good care of them.
Why would you mount a soundbar on the ceiling?
It will provide you more space on the ground. You can move in the room freely without any problem.
Your room will look broader and more significant. The sound quality will be better at the ceiling as compared to keeping it on the floor. The audience will get a direct throw of sound waves by sitting right down to the soundbar.
If you are using a larger room, you will not face any sound problem because the sound rays will travel in all directions by fixing it properly.
You should feel the difference between sound quality by keeping it on the floor and at the ceiling. You will see a significant difference in the volume and bass of the music.