Here are 16 best Diy methods to turn regular speakers wireless. Nowadays, everyone wants wireless speakers.
How to Make Regular Speakers Wireless? You can make regular speakers wireless by using a wireless speaker kit, Bluetooth receiver, Google Chromecast, Echo Dot, and a smartphone.
You have to add a type of wireless kit or an amplifier to your speakers, and the best thing is that they are quite easy to install.
- 1 How to Make Regular Speakers Wireless?
- 1.1 Tools required
- 1.2 Wireless speaker kit
- 1.3 Set up the transmitter
- 1.4 Set up the receiver
- 1.5 Connect the receiver to speakers
- 1.6 Connect the receiver with the transmitter
- 1.7 Methods for different types of wired speakers
- 1.8 Case of Passive Speakers
- 1.9 Making Powered or active speakers wireless
- 1.10 Making regular speakers wireless in case of traditional sources
- 1.11 Turning regular speakers to Bluetooth speakers
- 1.12 Making the Subwoofers Wireless
How to Make Regular Speakers Wireless?
It is always tricky to handle a wired speaker. They make the place tedious where they are kept. Wireless speakers are still easy going and easy to handle. Usually, all the sound devices, either wireless or wired, require only three things to function correctly.
- An Amplifier
- An audio signal
These devices are already plugged into power. They have fitted amplifiers in them. They don’t use older copper wires; instead, the audio signals are transmitted to the gadget wirelessly with Bluetooth, Wi-Fi, Infrared light, or radiofrequency waves.
Usually, wired devices have no built-in amplifier, and they are not receiving the audio signals without a wire.
If you need to convert your wired speaker to wireless, you need three things.
- A transmitter
- A wireless receiver
- An amplifier.
If your devices are self-powered, it is easier and simple to make them wireless, like a subwoofer or computer speaker, as they have their power or electricity supply. If anyone has these self-powered systems, then it only requires an adapter.
With the help of a kit, you can make your wired gadget wireless. This kit sends the audio signals with radio frequency (RF) signals. They send high-quality sound signals. This process is a little complicated, depending on the kind of your speaker.
Wireless speaker kit
This kit contains a transmitter that you have to fix with the receiver, connecting to the device. These kits are designed for the rear devices as wiring the frontal speaker is not a big problem.
Two main kinds of kits are there in the market. First is the one which has not any built-in amplifier in it. This type of package only sends the audio signals. It requires an additional amplifier to provide power. The second available kit has an amp in it that is built-in.
If the receiver you purchased doesn’t have any pre-outs, ensure that the transmitting unit accepts the speaker’s wire as the input. You can also use the line-level adapter to change the leads of the speaker into RCAs.
There are some kits available that have both inputs and output sources in them for the subwoofer. Many subwoofers have an amplifier, and it is effortless to make these subwoofers wireless. If your soundbar says check subwoofer, check the wires.
Set up the transmitter
Secondly, you have to set up the transmitter. Connect the transmitter with your speaker’s receiver whenever it is possible to try to use a digital connection.
The transmitter will send the audio signals by using radiofrequency waves. There are different options to input the audio signals in different kits.
The particular connection that you will make (headphone jack, RCA, coaxial, speaker level link, or optical) will ultimately depend on the available outputs and inputs of the transmitter of your speaker and its audio source.
Set up the receiver
Now, you have to set up the receiver. If your receiver doesn’t have an amplifier, connect the RCA from the receiver to the amp.
Keep that in your mind that always mount the speaker close to the electrical outlet because the receiver needs the power to work.
If the system is using infrared ray technology, you have to fix all the receivers in a place directly exposed to the visual line of a transmitter.
Connect the receiver to speakers
Connect the receiver to the speaker with the help of a speaker cable. While connecting, you should pay much heed to the polarity, fasten the positive terminal with the positive one, and the negative terminal with the negative.
Connect the receiver with the transmitter
Connect the receivers and transmitter and switch on the system. Paly and audio on that audio system and test that if your network is working or not. Adjust the speaker placement or any other setting as required.
If it is working correctly after connecting all the outputs with inputs, then congratulation, you have completed the procedure.
Methods for different types of wired speakers
You will need a different kind of equipment and devices for different wired devices. Some of this equipment is very cheap and readily available while the others are very costly and can need other kinds of equipment like an amplifier.
Case of Passive Speakers
If your home theater system is 5.1-7.1-9.1 and you need it to make wireless. Usually, people purchase these kits for the rear and surround sound and also for the subwoofers.
Wiring front and center channels are so simple. If you can’t find a speaker like that, then buy another amplifier for that receiver. Connect the speaker’s transmitter with the AV receiver or amplifier and then attach the speaker with the receiver.
If the speaker’s purchased receiver doesn’t have an amplifier with built-in features, then buy one for your speaker. After buying, connect that amplifier with the receiver and then attach the speaker with that amplifier. But if you will buy a receiver having a built-in amp, it is more convenient for you.
If you need to make the passive gadgets to stream the music from a smartphone and if someone has an amplifier, it can utilize any of the above-mentioned Bluetooth receivers like AudioEngine B1 or Wi-Fi type receivers like Bluesound with Node 2 and SONOS Connect.
But the disadvantage of these receivers is that they do not have an amplifier with built-in features. So you cannot connect these receivers directly. Instead, you have first to attach them to the amplifier and, after that, connect the amplifier with it.
Making Powered or active speakers wireless
Suppose if someone has an audio system of 2.1 or 2.0, which has an amplifier with built-in features. If you need to stream the music from a personal computer or the phone, all you have to do is fix a straightforward receiver of Bluetooth to your device’s central speaker.
You can also use the Echo Dot of Amazon or Google Chrome cast Audio as an alternative to a Bluetooth speaker. Both these audio devices have their disadvantages and advantages. But one best thing about all of them is that they are very cheap and affordable. You can connect Google Home Mini with your soundbar.
Use Google Chromecast
Chromecast Audio works on Wi-Fi but not on Bluetooth. It is considered to deliver a much better audio quality if compared to Bluetooth.
You also know that Wi-Fi has much more reliability and responsibility than Bluetooth. It also offers much better data rates and gives out good speed.
Chromecast audio is available in the market with only a tiny cable of AUX that you will connect with the speaker. After joining the wire, you will download the app of Google Home and set it up with your system.
After this complete setup, you can directly stream audio from the laptop or smartphone. But you will only be able to do it in case if you will find a Chromecast-enabled application.
The 1st Google home version will permit you to receive your favorite music from your phone’s storage. If you want to play music from the device’s internal storage, you have to download Chromecast-enabled media players like VLC media player, etc.
Chromecast Audio permits you to build a multi-functional speaker set-up. If someone has more than one wired speaker, which is installed in multiple rooms, then by purchasing Chromecast Audio electronic key, group all units with each other. Then, you can easily control all with the help of the Google Home application.
Bluetooth receiver has so many varieties. This usually have3.5 mm output or RCA, and you have to connect these to the analog input. The extraordinary big-budget receivers contain the latest Bluetooth versions and digital outputs.
Some of these also go with aptX low codec. If you need a cheap product, then he should better go for the Logitech receiver that is Bluetooth. But if you wish for a more advanced system with digital outputs, you can also check the transceiver of Avantree TC417.
It is a device having a receiver and transmitter both in one frame. If you cannot afford generic brands, then you can also try Harman Kardon of BTA-10. It has inferior specifications, but it costs more.
The third option is a Bluetooth transceiver or Bluetooth receiver with aptX
Bluetooth transceivers and receivers, which are supported with aptX, are comparatively cheap. Also, pay attention to the output terminals. Search the device or receiver, which will match with the outputs of your device.
If your speaker has RCA or 3.5mm inputs, the analog outputs are best for you. If the speaker inputs are digital, you should go for the device with digital outputs.
Usually, the analog outputs are cheap than the digital ones. Some are cheap, with a price of $30, like the TaoTronics TT-BA07. If someone needs a digital product, it will pay more as the digital receivers are more costly.
The type of receiver you have to buy depends upon the inputs. The best considered and most liked product is AudioEngine B1.
Making regular speakers wireless in case of traditional sources
You can make the wired speakers of the DVD player, CD player, Home theater system, Audio cassette deck, VCR, TV wireless by using a conversion kit. This kit is also known as the adapter or speaker kit. This kit usually contains a receiver and a transmitter.
You have to connect the source’s stereo or audio output with the audio inputs on the transmitter. This transmitter sends the signals from the linked source to the receiver without any wire connection.
These steps are helpful if used in Mono or single, Surround, Zone 2, and others.
Step one: First of all, you have to link the source device’s audio outputs with the transmitter’s audio inputs.
Step two: Connect the receiver with the wired device with the help of a speaker’s standard wire.
Step three: Connect the receiver and the transmitter with each other, also connect the amplifier if required, and then plug into the AC power. Turn on the AC power and even turn on the audio source. Now you can stream your favorite music anytime.
Turning regular speakers to Bluetooth speakers
You can stream your favorite music with the help of additional adapters and an amplifier. If you are an iPhone or Android user, you can connect your mobile phone with the receiver, connected with the traditional amp, or the receiver of your home theater. These receivers then connect your phone and wired products.
You can also plug a CD player, DVD player, VCR, TV, or Audio Cassette Deck into your Bluetooth transmitter. They will send audio signals to the receiver of Bluetooth, which attach to the amplifier and the wired devices.
Instead of connecting the receiver with the external amplifier, you can also use stereo, the home theater receiver with built-in support.
It means they will receive signals straight from the smartphone or a connected source or linked with a transmitter. Connect it with the terminals given on the Bluetooth-enabled amplifier.
Making the Subwoofers Wireless
If you already have a subwoofer in the setup of your home theater, you can easily make this subwoofer wireless with the help of a regenerating kit, which has an input for a subwoofer on the top of the transmitter and it also has an output of subwoofer on the receiver. You can also connect ceiling speakers with a subwoofer for better results.
This is an effortless task to do if your subwoofers are powered. Powered subwoofers have built-in amplifiers and also have a plug into an AC power.
Step one: Connect the Subwoofer receiver’s output to the transmitter by using a tiny RCA cable.
Step two: Connect a tiny RCA cable of the receiver to the RCA of stereo or LFE inputs.