Smartphones and smart devices have taken over, and they have become fundamental providers of our everyday entertainment.
These devices can do it all, from playing music to watching videos and listening to your favorite podcasts! However, their small speakers often fall short when it comes to sound quality and volume.
Luckily, with technology, almost all devices can nowadays transmit wirelessly to great-sounding external speakers via Bluetooth.
Therefore, what happens when you own a traditional or wired set of speakers that you love and do not want to get a new set of Bluetooth speakers?
Is it possible to convert a wired speaker into a Bluetooth speaker? The short answer is: Yes, it is!
Get a Bluetooth Adapter or Receiver
The first thing you require to convert your ordinary speakers into Bluetooth-supported speakers is a Bluetooth receiver.
A Bluetooth receiver works by taking a wireless Bluetooth audio frequency, transforming it into a line-level electrical audio frequency. A line-level signal is a low-power, noise-resistant signal, similar to the signal produced by laptops, cellphones, or preamps.
There are different types of Bluetooth adapters, and the one you buy will greatly depend on the type of speaker you have.
If your speaker has a USB port, then a Bluetooth USB receiver can easily transform that normal speaker into a Bluetooth speaker. If not, then you can get a receiver with a female aux jack and female RCA connections.
There are also Bluetooth receivers with only a male aux output. These are primarily designed for vehicle audio systems.
If you have good knowledge of electronics, you can also consider getting a Bluetooth receiver board connected to the speaker system’s motherboard.
Bluetooth receivers are fairly priced, and high-quality adapters range from $10-$30, contingent on the brand.
Connect the Bluetooth Receiver to the Speaker or Speaker System
Once you get a Bluetooth adapter, you will then have to connect it to your speaker system. Depending on the type of receiver, the process of connecting can be straightforward or highly complex.
If you get a USB or an audio jack Bluetooth receiver, all you need to do is plug it into the USB port or the audio jack, turn on the speaker system, and you are set to go.
If the receiver has a female stereo aux and RCA outputs, you will need to connect them to the speaker system using these cables.
This process is not as simple as the plug and play of the previously mentioned adapters, but finding an aux female to the left and right male RCA cables is often not too complicated if your speakers have an RCA connection.
Connecting a Bluetooth receiver board is usually the most challenging to convert your ordinary speaker into a Bluetooth speaker.
Therefore, it must be done by someone who understands electronics, speaker system motherboards, and circuits. The process involves soldering the Bluetooth component into the speaker system’s main circuit board.
If you are not knowledgeable enough about electronics to make this complex connection, it is advisable to let a professional electrician do it.
The Bluetooth receiver board has to be connected to your speaker system’s main circuit board, which poses a risk of potentially damaging your motherboard instead if done by an amateur.
Regardless of the type of Bluetooth receiver you are using, it is essential to confirm that a connection is established. Without a proper connection, it is impossible to utilize the wireless connectivity of the Bluetooth adapter.
Pair Your Devices With the Bluetooth Receiver
If you successfully connect your traditional speaker to the Bluetooth receiver/adapter, then a huge chunk of work is out of the way!
The next step is to now pair your Bluetooth-enabled device to the Bluetooth receiver. First, ensure that the Bluetooth receiver is turned on and it is set to pairing mode. If the speakers are powered, make sure that they are plugged in as well.
On your Bluetooth-enabled device, turn on the Bluetooth feature and scan for available devices to pair with. Once you get the receiver on the list of available devices, pair your device with the receiver. As simple as that, you are set to go!
Once you establish a connection between your device and the Bluetooth receiver, you can now broadcast audio to your speakers wirelessly.
Why Turn Your Wired Speakers to Bluetooth Speakers?
Almost all new devices in the market currently are produced with built-in Bluetooth capability. However, maybe you have this old set of speakers that you love so dearly, and they probably hold a special place in your heart.
If you decide to keep your wired set of speakers instead of getting new ones, what are the benefits of making them wireless?
It helps cut down on wire clutter characteristic of traditional wired speakers. It also allows you flexibility and mobility not offered by wired speakers (depending on the range your chosen adapter covers).
Some adapters allow you to connect wired device with Chromecast for audio and Amazon Echo devices.
This list is not exhaustive, and these are just a few benefits that come with converting your speakers to Bluetooth speakers.
These simple steps can allow you to convert your standard wired speakers into wireless Bluetooth speakers. There are numerous types of Bluetooth adapters in the market, and you must choose a durable model that will connect with your regular speaker.
Depending on the type of speakers that you have, you can select the best Bluetooth adapter to use. If you do not, then you possibly will not get the desired outcome. Also, make sure to follow the correct steps when setting up to ensure success.
For the more complex connection that involves opening the speaker system and fixing the Bluetooth component to the mainframe, let qualified professionals handle it for you. The fantastic thing is that several Bluetooth receivers can be used both in your home stereo or your car’s stereo system.