A long throw projector can short throw with these easy methods. You have to follow the simple steps to change the long throw projector into a short throw projector. These things will depend on the size of the home theater in which you are operating the projector.

How to make long throw projector to short throw? You can make a long throw projector to short-throw by checking the settings of the projector, make metal support, use a 3Dprinter to accurately incline the lens, and start a test run.

There are different uses of the short throw if you want to make smaller images on the screen of the home theater. You will get better pixels of the images if you have followed the proper criteria for this process.

You can adjust the ranges of the projector throw with small changes in the projector. You may need to identify the exact size of the projector throw to make it easier for the viewers of the home theater.

How to make long throw projector to short throw?

You have to follow these steps and start changing the projection of the projector. You must check the number of lumens present in your projector to improve its projection abilities. It may work appropriately after changing its projection throw.

The mirrors should be present in an excellent number to produce the image of the projector. You have to check all the abilities of your projector before starting this process. If your lens is not working well, then you must replace it before doing any new thing. You have to look for all the main parts of the projector before starting the changing process.

Tools required

There is not a long list of the tools that you will need to change the setting of your projector. You will need the converter of the lens, small piece of aluminum pipe, few numbers of screws and nuts, and a 3D printer for a good print of the projector objects. These are the tools that you will use in all the processes, and you will not require anything else.

You have to purchase the nuts and bolts by seeing the size of the projector’s nut. It will save you stuck in the middle of the process. If you have purchased all the tools of good quality and tried it before starting this process, then you will not face any problem in the execution of this process. You may try to note that the working of all the tools before using it while changing the setting of the projector.

You must buy all these things from the official outlet or the online website. You have to focus on the small issues before they may prolong when you open the casing of the projector. All the work should be done gently and with complete care. After making all the arrangements for the process, you have to open the casing of the projector.

Provide the lens support

You have to note the setting of your projector before deciding a metal for its support. The aluminum sheet fixes some projectors, and some projectors require the support of the wooden piece. Lens support is a necessary thing with the help of any metal present there.

You should have created a better match of your projector with the appropriate piece of the metal present there. There cannot be one solution for all types of projectors. You must need to believe in your creativity without seeing any problem with your projector. The support of the lens is necessary while removing or attaching the assembly of the projector.

Use 3D parts of the projector

You have to print all the parts of the projector on a 3D printer from your vicinity. You have to use the 3D print of the base assembly. It will provide support to the aluminum pipe and to the metallic support of the lens that you are using. The base assembly is an essential part of doing all this process entirely. The quality of these central parts should be your much-needed priority.

You can adjust the position of the lens in the base assembly of the projector. You can change the direction of the lens in the projector as you needed. The spacer is also a part of the projector that is used for the maintenance of the angle of the projector. The angle of the projector lens can vary along the vertical axis and horizontal axis both. You have to focus on the proper working of all the parts of the projector.

You can change the inclination of the lens through the lens of the projector. These all parts of the projector should be getting on the paper as the 3D printer. By understanding the 3D prints of these parts, you will learn how to join them on the paper of the print before joining them in reality. You will come to know about the proper shape of these elements.

Join all parts of the projector

After learning the joining process of different parts, you have to start assembling all the parts of the home theater. You should use the proper quality of the nuts and bolts to fix the projector parts with each other. All the nuts and bolts should be fixed with each other with complete focus. If you have not tightened all the nuts properly, it will affect the working of the lens inside the projector.

You can also use plastic handles in the adjustment of different parts with each other if they are required. It will complete this process with extra care. You can use the multiple lenses inside the projector and use the faster switch to change the one lens to another. It is an easy task for you to join all the parts together. You can also use a pico projector for this purpose.

Adjust the setting of the projector

After joining all the parts of the projector, you have to set these parts as you want to get work from them. The calibration of different parts is required to bring them to a normal position before starting the projector.

You may try to note the different directions of the lens while calibrating it. You can play a small imaginary image on the projector screen to perform all the settings of the projector. This step will not take you too much time.

Start the projector for a test run

When you have completed the calibration of all the parts of the projector, then you will have to start the projector for the test run. The test run is done without reviewing different steps.

You have to note the working of the various steps and try to note the errors that you have faced in the whole process of the test run. You can manage these deficiencies after making amendments to the connections of the home theater.

Do any changes after test run if require

You will get an idea about the working of the projector after doing the test run; then, you can make any changes in the projector if they are needed. You have to do this step to improve your working of the projector. You will not face any difficulty while doing all this process with complete care and focus.

If you see that the projector is working in normal condition after the test run, then you can go for a complete reviewing of the connection of the projector. After reviewing all the connections, you can use it permanently.

What is the throw ratio of the projector?

It is the distance between the lens of the projector and the screen of the home theater. This distance creates a lot of impact in the image building of the projector. The projection of the light on the screen and its size will depend on this distance.

You may try to note that this distance matters a lot in the home theater because the screen of the projector is playing the central role in your entertainment setup.

The ratio is two times for the regular projector that is using in most of the home theater and have an excellent response to the good brands of the projector. You can find this ratio by simple mathematical calculation of the distance. You have to calculate the size of the image and distance between the projector and its screen correctly.

You have to handle all the things about your projector properly before it may get worse. There are different needs of the various customers when deciding about the throw ratio of the projector. There is no specific tool to identify which of the ratio is best. The ratio of the projector is good if they are fulfilling your needs accurately. You may try to note that the ratio should fulfill all the needs of the home theater.

There will be a small difference between the same type of projector but manufactured by different brands. The difference in small points will not matter a lot in deciding on the purchase of the projector by seeing its ratio.

You can ask for your desire ratio from the shop and can purchase if you like all the characteristics of the projector, but there is a small difference in its ratio. It would be managed with the use of the projector later on.

Comparison Chart for Long Throw Projector vs Short Throw Projector

Type of the projector	The ratio of the throw of projector	The distance of lens to screen
Common projector	Around 1.6:1	Eight feet
Short throw projector	0.4:1 – 1.5:1	Three feet
Long-throw projector	Greater than 2:1	More than ten feet

The table mentioned above clearly shows a comparison between three types of projectors. You can use different types of projector depending on your needs and demands in the home theater. The short-throw projector gives you a small size of the screen, but the image is quite clear. The long-range projector will provide you with more than ten feet of the image, and you cannot see the quality of the image in this projector.

You have to note these differences between different types of the projector before deciding the type of the projector. Both kinds of projectors have their advantages and disadvantages.

The distance of the lens and the projector screen also matter a lot in the production of the pixels of the image. The long-throw projector will occupy more space because it will cover more distance before the projection of the light on your screen.

These are the few differences between the different types of projectors that you must know while making your home theater from the start.

What is a long throw projector?

These projectors have a smaller size of the image on the screen as compared to the distance between the lens and screen. It will give you a ratio of more than one time, and you can use these projectors for covering long distances in a short time. If you have the high roof of the home theater, then you can use this type of projector for covering the distance from the roof-mounted projector to its screen.

If the setting of the projector in the home theater could not become near to the screen, then you can use the projector with the ratio more than the one time. It will fulfill all the needs of the home theater, and you will enjoy the video streaming without any type of interruption. You can place this projector on any kind of surface in the home theater; it will not produce any distortion to your favorite music.

This projector can be used in the external environment and will not cause any impact on its working. This projector is completely covered, and no dust particles can affect the functioning of the projector. You can use it in different directions in your setup. It has no issue with the portability and adjustment. It will only require two screws to be tightened and start using your projector. These things make a cheap projector better.

There are also some problems with using these projectors in your home theater. The shadow of the furniture and the humans will distort the image of the projector. You may try to note that the seats of the home theater should be adjusted in a way in which they must not distort the image.

It will block the major space for making the throw of the light. The light of these projectors will take the long paths, and you will manage that path for the light. You cannot use that space to place the seats and other furniture of the home theater. These are the few problems that you will face while using these projectors.

What is a short-throw projector?

The short-throw projector will be used when the owners will require the good size of the image quality and have a smaller movie room. The ratio of these projectors is less than one and varies from 0.5 to 1 time. This is the average throw of these types of projectors. These projectors will give you a wider image as compared to other projectors. The width of the projector will be increased to the two to three feet.

It will provide you the average size of the screen that you will enjoy. You can try different options for the setting of this projector. You can mount the projector on the ceiling of the theater, or you can place it on the table. The mounting of the projector usually increases the distance between the screen and lens. This projector is used by placing it on the table in front of the screen.

It will save a large space for your home theater. You can make different designs of the seats to get more space.

It will take a small surface for the projection of the image. The projection surface is more than three feet in the regular projectors, but this projector will provide you the surface of projection less than the two feet. They will project the images from the backside of the screen. It is the unique feature of these projectors, and the image will not show any dots or lines in its formation.

You can also face some problems while using these projectors as it will get more power from your system that can cause fluctuations in the voltage. The rectangular images will be converted into different irregular shapes that are not too comfortable for the viewers. You have to check it regularly if you are using the projector for a longer time.

The prolonged usage of these projectors will cause problems in the home theater. The short-throw projectors are facing these problems and negative reviews about this problem from the customers. Some manufacturers of these projectors are trying to overcome this problem, but they are not successful completely.

You should not forget to install the cooling fan in this projector because it will get hot too early. You have to manage the working of these projectors by using the vents and cooling fan. Both things should be properly working and clear without any obstruction of the dirt particles. You have to note these things while using the short throw projectors.

It will cause too much noise when start to exhaust the air from the inner side of the projector. You must manage this voice of the projector also; otherwise, it will irritate the viewers. It will give you the image that is specifically projected at a certain angle, and you have to note these if you can use it without any problem. Your enjoyment in the home theater will not be disturbed by the problems of the projector.

You can decide the best projector for you by looking at your needs. If you want the projector screen to be large, then you can go to use the short throw projector. This projector will complete all your needs, and it will be placed in a small place also. You can add a 4k soundbar with your system.

Short throw projectors are used in a lot of places in your daily life. You can use this projector for the small theaters where you want the small size of the screen. You can use the projector for a small conference room in which ten to fifteen members can participate in the meeting at once. These places will require the short throw projector for its use.

You have to understand the small details of the place where you want to adjust the projector. By knowing the complete details of the area and seating plan will allow you to make the right decision of the purchase of the home theater.

Different schools and universities also use this projector because they have to use it in their small classrooms and seminar halls. It is cheaper for them to use this projector in their place.