How to Install Speakers in Car Trunk?
Car speakers deliver good quality music and they are drivers best companion. I have to travel a lot because of my job, but for me traveling is always fun when you can listen to your favorite tracks.
In this article, I have explained a step-by-step guide for How to Install Speakers in Car Trunk? With speakers installed properly in the trunk, you have better sound experience.
- 1 How to Install Speakers in Car Trunk?
- 2 Step-by-Step Installation Guide for Installing Speakers in Car Trunk
How to Install Speakers in Car Trunk?
Car speakers are a beautiful instrument to be placed in the car. Its location matters a lot. Sometimes you are not satisfied with the position of the speaker in the car. You have to replace it. It’s a tough job. I am using Polk Audio 6×9 car speakers, they are just awesome and deliver high-quality sound.
Installation of a speaker is a difficult process, as you have to do a lot of effort in this regard. You need a full on manual and tool kit to do so. This is time taking too.
Tools Required for Installing Speakers in Car Trunk
- Screwdrivers, a full variety
- Torx drivers and bits
- Allen wrenches
- Socket wrench set
- Wire cutter /Stripper tool
- Solder/ Soldering iron
- Crimping tools and connectors
- Panel removal tool
- Hobby knife
- Electrical tape
- Retaining clip remover
Things to remember
Always keep in mind that as the human body every car is unique and different. You should keep in mind that car comes with the master blueprint and you should keep this blueprint in your mind for a better view of the things. You must be familiar with car speakers sizes before you start the installation.
Types of installation
There are different types of installation techniques for sure you will go for the technique which suits your car style and your taste. Components of the speaker are woofers, subwoofers, and tweeters. Some speakers also come with installation devices.
Some types of installation of speakers are as follow:
- Replacing dash speakers
- Replacing door speakers
- Installing rear speakers
- Adjusting speakers in the trunk
Step-by-Step Installation Guide for Installing Speakers in Car Trunk
Here, I have explained in detail the entire process of installing speakers in a car trunk.
The first and most important thing to do is that disconnect the battery. The most important thing to do is to disconnect the negative terminal of the battery and it will protect you from draining the battery and also save you from short circuit and accident.
Prepare your parts
While installing a speaker you should keep in mind one thing that the parts you want to apply should carry the proper adjustment of the speakers and prepared at the time of installation.
You should consider where your tweeters and subwoofers should be placed and this should be kept in mind that the tweeters and subwoofers should be a one-foot distance from each other not very far off.
Cross over wires
Cross over wire wires is used to increase the bandwidth and the frequency of the songs with which we are listening to the music. You should also prepare the cross over wires to increase the music experience and bass.
Box for installation
A box made up of cardboard, plastic or wood can be used for the installation of speakers. This box is necessary as it provides protection to the speakers. It is also very important to providing full bass effect with high frequency.
Screws and hooks
Screws and hooks are used to keep the speakers at its place and adjust to the trunk so that it may not fall off. It will be intact at its place and will not fall off thus working is a lot easy on this kind of adjustment. The screws are present at its place thus prevent the system from jerking and falling apart.
Conjointment from the trunk roof
It is an easy task with the help of which you can join the speakers from the roof of the trunk. You can use the hooks for this purpose and it is quite a helpful thing. They will not occupy much space. You can easily attach it on the roof and thus there will be a lot of space in the trunk for other things.
Plates or strips for fixing speakers in a car trunk
You can also keep the speakers adjusted to the wooden or metallic plates so they can get attached to one place and you can enjoy music in full bass. You can adjust these plates on the floor of the trunk and enjoy it completely. Properly connect your car speakers with a crossover. This thing also looks aesthetically beautiful.
You can listen to the music at the optimum levels but I recommend that you should listen to medium levels thus it may not affect the battery of your car. It is also not recommended for safe driving. Thus you may listen to music at medium volume and enjoy your experience.
It is not a tough job to adjust your car speakers in the trunk. If you know how to do little electronic tasks and then you also possess the tool kit for it. It is the only way through which you can easily install the music system in the trunk of your car.
Feel free to contact me if you have any questions related to this topic. I will post a detailed article on your question, so shoot your questions in the comment section below.
Best of Luck.
Team – Howstereo.com
- Pioneer vs Kenwood
- Will Any Car Stereo Fit in My Car?
- Best Subwoofer Box Design for Deep Bass
- How to play Youtube Videos in Your Car?
- How to Play Video on Car Screen?
- How to get more bass out of your subwoofer?
- How to Install Tweeters to Head Unit?
- How To Break In A Subwoofer?
- Underseat Subwoofer vs Trunk Subwoofer
- How to Clean A Subwoofer?
- How to Adjust Car Stereo for Best Sound?
- How to connect a crossover to speakers?
- How to adjust car equalizer settings for bass?