How to Remove Plastic Plugs from Amplifier in Car?
When the stock sound system of a car cannot provide enough power to the speakers, or you want to set a subwoofer in your car, then you always need an amplifier for your car.
Buying an amplifier for a car is not enough; you need to configure, wire, and install basic necessary items for better performance.
Here are the 4 steps to remove plastic plugs from Car Amplifier:
- Step1: Choose a suitable screw
- Step2: Insert the screw in the plastic plug
- Step3: Pull out
- Step4: Repeat for others
But when you are using an amplifier in your car, everything about the sound system is not as simple as it was before when you were only using the stereo unit. There are further configurations, adjustments, and compatibility problems that you will have to face when you are using a car amplifier.
How to Remove Plastic Plugs from Amplifier in Car?
When people buy a new amplifier, they always worry about the plastic plugs that are inserted in the output ports of the amplifier. They cannot pull these plastic plugs out of the amplifier and insert the subwoofer or speaker wires in it. They always go to some car technician for this purpose.
But there is no need to worry about this problem anymore because we have a precise solution to this problem. So, the main question that people ask often is how to remove plastic plugs from the amplifier of the car?
Well, we will guide you with a simple procedure that will go step by step, and you will be able to take out these plastic plugs.
- Drill machine
There are two ways to take out the plastic plugs from the car amplifier. One way is to take it out with the help of a drill machine, and the other way is to take out with the help of a screwdriver.
Both ways are fine, but if you have to take out a large number of plastic plugs, we recommend you to use a drill machine so that you do not get tired of the procedure.
There is only one precaution when you are doing the steps mentioned below. You must be careful when using the drill machine and the screws. If you are not sure that you will be able to use the drill without damaging the port, then you must use a screwdriver and learn from it first.
Choose a suitable screw to remove plastic plugs from car amplifier
There are many types of screws that are used for several different purposes. Some are used for walls, and some are used for woods. Some screws are not very hard, so they are used to screw plastic items in the car. You must use the screws that are used for softer products, like plastics or softwood, etc.
Use a screw that is at least 1-inch long. If you use a longer screw, it will be easy for you to pull the plastic plugs out of the amplifier.
Insert the screw in the plastic plug
When you have a right screw for the purpose, you will have to insert the screw in the plastic plug, so that you can proceed with the steps. Now, it is up to you that you want to use a drill machine or a screwdriver for this purpose.
The more professional way is to use a drill machine and take the plastic out in minutes. If you use a screwdriver, you will have to apply force, and your hand may get into pain after doing so much work. So, use a drill machine to do that.
How will you insert the screw? The best practice is to put the screw on the plastic plug head and then put the drill on the head of the screw. When the drill is placed on the head of the screw, and the screw is tightened in the drill, try to put the sharp end of the screw in the plastic plug and start the drill for only one second.
When you apply force with the drill, it will suddenly get stuck in the plastic plug, and you will have to stop the drill at the same time so that it does not go deeper and damage the port. When the screw is inside for almost half-inch, the screw and the drill are stuck. So, this step is complete because the screw is inside the plastic plug
So, to pull out, you will have to be very careful. Otherwise, you may break the port of the amplifier. You will have to pull the drill out along with the screw.You do not have to hold the plastic plug. Only hold the amplifier and pull the drill with a jerk, and the plastic plug will get out with the screw.
This is important step when you remove plastic plugs from amplifier in car. The main purpose of inserting the screw is that it goes inside and gets stuck to the plastic plug of the amplifier, just like when the screw is inserted in something, and it stays there. But in the case of the plastic plug of the amplifier, it is designed in such a way that it cannot be pulled out with the hand.
It can only be pulled out when something is stick to it, and you pull that material, and the plastic plug comes off with it.
Repeat procedure to remove all banana plugs
So, you have understood the basic technique with which you can easily pull the plastic or banana plugs out of the amplifier. If you have an amplifier with more than two or four output ports, then only pull out the plastic plugs from the ports, which are to be used in the sound system.
The purpose of inserting the plastic or banana plugs in the car amplifier ports is that, sometimes, there are extra ports on the amplifier that you do not usually use. So, when the ports are left open, dust particles and moisture damage the ports and make them unusable in the future.
So, these plastic plugs are for the benefit of a car amplifier.